Svenska 
Español 
Nederlands 
Deutsch 
België
Decentralised Emergency Lighting
Description
In the event of a power failure, Veko’s decentralised emergency lighting continues to operate reliably thanks to an integrated battery and switch-over module in each luminaire. During an emergency, the system automatically activates with a light output of 500 lumens. Thanks to optimised optics, it ensures maximum light performance and safety, using fewer luminaires.
Specifications
| IP code | IP40 - IP65 |
|
Length |
300 mm |
|
Application |
Industrial areas, sports venues, swimming pools, retail, parking garages and cold stores |
|
Installation height |
2 - 20 m |
|
Colour temperature |
840 K |
|
Lens options |
Narrow, Semi Wide, Wide, X-Wide, Diffuse and Circular |
|
Impact resistance |
IK10 |
|
Options |
DALI, Eaton or fixed driver |
|
BREEAM |
Yes |
FAQ
What is the advantage of motion detectors?
Motion detectors or presence sensors are an excellent combination to be used with LED lighting, because they can directly turn on and off. This type of lighting is ideal in a hall, or a toilet, but it can also be used in a variety of industrial spaces and warehouses where people are working. Most LED lights are tested to survive 1,000,000 switching times, which is good for years of use. One tip: it is preferable to apply a motion detector separate from the luminaire, since the light source is likely to last longer than the sensor. Moreover, a defective sensor can prevent additional cost savings.
Can I program a MD-O presence detector from the factory settings?
Yes, using a remote control unit (TR61). You can program multiple presence detectors with one remote control.
I still use an old-type of presence detector. Which is the replacement model?
Do you currently use an ADR? The replacement model is the MD-O-MK2.
Do you currently use an ADVR? The replacement model is the MD-O-MK2.
Do you currently use an ADRI-13? The replacement model is the MD-O-3M.
Do you currently use an ADRO? The replacement model is the MD-O-BO.
All our MD-O presence detectors can be programmed by remote control, using the TR61.
Is your current presence detector not included on this list? Please get in touch with us by email at info@veko.com
The presence detector I have received is faulty. How can I return it?
Send your return request including order number to info@veko.com and describe the problem with the detector. We will then send you a return form with further instructions.
How can I get advice on my lighting system?
Our account managers are happy to visit you for a consultation. Please contact us for an appointment.
Is LED lighting dimmable?
The driver is the determining factor of how dimmable a lamp or luminaire is, and in what way this should be done. For example, drivers can work with DALI, 0-10V or TRIAC (phase cut). Whenever it is possible to dim LED lights, this is always preferable. If the LED can be dimmed by 30%, it can increase savings by 30%, as well as extend the lifespan of the light. Dimming can be done manually, for example, with integrated dimmers, or automatically with a system such as DALI. A DALI system automatically adjusts the dim level of illumination based on the amount of daylight in a room. This is done by placing a sensor with a control device in the room. This additional cost is usually returned within a very short time based on energy savings.
